Adjust settings for Auto Power Off for a FieldLab Pressure Calibrator while in Manual Mode

Use FieldLab Desktop to adjust the length of time before the FieldLab automatically Powers Off off to conserve battery life.

Each Test Mode, including Manual Mode, has its own Auto Power Off settings. When you Activate a Test Mode on the FieldLab, the settings for that Test Mode will apply to the FieldLab as long as that Test Mode is active.

1

Open FieldLab Desktop on your computer.

2

Plug the FieldLab into your computer with the provided USB Cord and Power it On.

3

On the FieldLabs screen, select the FieldLab you'd like to adjust the settings for.

4

Select the Settings Tab

5

In the Manual Mode section, select the Change Button.

6

Adjust the Auto Power Off settings.

7

Save your changes by selecting the Save Changes button.

• Related Articles

• Adjust Auto Display Sleep: Manual Mode

  Use FieldLab Desktop to adjust the length of time before the screen display turns off to conserve battery life while your FieldLab is in Manual Mode. Each Test Mode, including Manual Mode, has its own Auto Display Sleep settings. When you Activate a ...

• Adjust Logging Interval in Manual Mode for a FieldLab Digital Pressure Calibrator

  Use FieldLab Desktop to adjust the length of time between each point logged on a FieldLab while in Manual Mode. 1 Open FieldLab Desktop on your computer. 2 Plug the FieldLab into your computer with the provided USB Cord and Power it On. 3 On the ...

• Adjust Auto Backlight Off on a FieldLab while in Manual Mode

  Use FieldLab Desktop to control the amount of time that the backlight stays on before shutting off automatically to conserve battery life. Each Test Mode has its own Auto Backlight Off settings. When you Activate a Test Mode on the FieldLab, whatever ...

• Create a custom Pressure Safety Valve / Pressure Relief Valve Test to run on a FieldLab

  Create a new valve test and add it to a FieldLab Pressure Calibrator to perform tests on pressure safety and pressure relief valves. This feature requires: FieldLab Desktop App version 1.24.0 or later installed on your PC. You can update from within ...

• Create and Edit a Valve Test for your FieldLab Digital Pressure Calibrator: Quick Overview

  This article provides a quick overview. For more detailed, step-by-step instructions, see: Create a custom Pressure Safety Valve / Pressure Relief Valve Test for a FieldLab This features requires FieldLab Desktop 1.24.0 or later. You can update to ...

• Recent Articles

• Pressure decay after squeezing hydraulic pump handles

  Pressure decay is a natural effect of using a hydraulic pump and does not necessarily (always check) mean a leak in your system. Here's why: When you use a hydraulic pump to increase system pressure rapidly, the hydraulic fluid's temperature rises. ...

• How to Place an Order Using the Ralston Instruments Distributor Portal

  Purpose: This article explains how Ralston Instruments distributors can efficiently place an order using the Ralston Instruments Distributor Portal. Note that this is only available to users who are employees of authorized Ralston Instruments ...

• How to Request a Quote from Ralston Instruments

  Overview At Ralston Instruments, we aim to make the quote request process as streamlined as possible for both end users and distributors. This guide outlines the steps for each group to request a quote efficiently. For End Users End users are ...

• Calibrate the pressure sensor on a Field Gauge and Process Meter

  Do-it-yourself instructions for calibrating a Ralston digital gauge with the free FieldLab Desktop software. At the end of this process, FieldLab Desktop will automatically make any necessary adjustments to bring your Ralston gauge to acceptable ...

• How long do the keypads on the LC gauge last?

  The keypad buttons on the LC10, LC20 and LC30 gauges last typically 5-10 million cycles. This varies depending on the ambient temperature as well as the force with which the buttons are pushed.