Adjust Zoom level of Vertical Pressure Bar

Zoom in or out on the Vertical Pressure Bar on a FieldLab Digital Pressure Calibrator.

The FieldLab screen has both a numeric and graphic readout to display the current pressure. The numeric readout is very precise, while the graphic readout to allows you to easily get a feel for the trend and speed in pressure change. This article shows you how to adjust the zoom level on the Vertical Pressure Bar to easily get the pressure information you need.

To adjust the view of the Vertical Pressure Bar:

While on the Main Pressure Screen, adjust the zoom level of the Vertical Pressure Bar by pressing the Zoom Button.

Each time you press the button, the view will shift from 1x to 2x...

...from 2x to 4x...

...and back to 1x.

• Related Articles

• Quick-Start Guide and User Manual for the FieldLab Pressure Calibrator

  Download in PDF format below.

• Run a Pressure Safety Valve/Pressure Relief Valve Test on a FieldLab Pressure Calibrator with auto-crack detection

  Use a FieldLab to automatically detect & record the exact pressure at which a valve cracks and reseats, with the additional option of recording Seat Tightness Test results. This features requires FieldLab Desktop version 1.24.0 or later. Download the ...

• Adjust Damping on a FieldLab Display

  Ralston FieldLab Digital Pressure Calibrators are capable of displaying pressure changes close to real-time, which in some situations is faster than the human eye can register. This article shows you how to slow down and speed up the rate of pressure ...

• FieldLab API Document

  The API document allows users to communicate with a FieldLab Digital Pressure Calibrator (model FLP1). Compatible with all FieldLabs using firmware 1.126 and above PC Serial Port Settings The recommended pc serial port settings are: Baud – 9600 ...

• Calibrate the pressure sensor on a FieldLab

  Do-it-yourself instructions for calibrating a FieldLab with free FieldLab Desktop software. At the end of this process, FieldLab Desktop will compare the readings from your Reference device and FieldLab (Zero, Mid Point, and Full Span) and if it is ...

• Recent Articles

• Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30

  This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...

• Operation Instructions 10,000 psi Hand Pump (Model XTHP)

  Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...

• Operation Instructions 5000 psi Hand Pump (Model QTHP)

  Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...

• Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth

  What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...

• A Gauge is Overpressurized

  Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...