Change Display Sleep Timer on a FieldLab for a Data Logging Test

When you Activate a Test Mode on a FieldLab Digital Pressure Calibrator, the settings for that Test Mode will apply to the FieldLab as long as that Test Mode is active. Each Test Mode has its own Auto Display Sleep settings.

You can use FieldLab Desktop to adjust the length of time before the screen display turns off to conserve battery life.

1

In FieldLab Desktop, go to the Test Modes Library.

2

Locate the Data Logging Test Mode you want to edit.

3

Select the Edit Button

4

Adjust the Auto Display Sleep setting

5

Save your changes.

6

Sync the changes.

Sync to get the updated Test Mode onto the FieldLab Pressure. Instructions for doing so are here: Sync Test Modes.

• Related Articles

• Add Custom Data Fields to a Test

  Note: You may need to perform free updates to your FieldLab and FieldLab Desktop in order to use this feature. Available for FieldLab Desktop versions 1.10.0 and newer, and FieldLab Pressure Calibrator firmware v1.117 and newer.   Instructions for ...

• Data Logging Test Settings Overview

  Introduction to the Data Logging Test Modes screen in FieldLab Desktop. Create and edit the custom Data Logging Test you need to run on a FieldLab Pressure Calibrator. Test Mode Name - Enter a custom name for your Test Mode.  Test Mode Units - Select ...

• Create a Snapshot Logging test

  Create a Snapshot Logging Test in FieldLab Desktop that you can sync & run on a Ralston FieldLab, or use a FieldLab or Field Gauge connected to your PC and log the data directly to FieldLab Desktop. Things you will need to create the test. A PC ...

• Create a new Data Logging Test

  Create a test to run on a FieldLab Pressure Calibrator that logs data according to your customized settings including Units, Logging Interval, and Session Duration. You can also create custom power management settings that apply only when your custom ...

• Run a Snapshot Logging (Single-Point Logging) Test on your computer

  View and log live single-point pressure readings on your computer, enter any additional metadata your test requires via your keyboard, and save everything to one dataset. These instructions cover how to run a Snapshot Logging Test on your computer ...

• Recent Articles

• Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30

  This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...

• Operation Instructions 10,000 psi Hand Pump (Model XTHP)

  Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...

• Operation Instructions 5000 psi Hand Pump (Model QTHP)

  Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...

• Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth

  What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...

• A Gauge is Overpressurized

  Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...