Change Engineering Units on a Field Gauge LC20
Switch displayed pressure and temperature engineering units.
1. Press and Hold the Menu/Up Arrow Button.
2. Press the Backlight/Right Arrow Button to scroll to UNITS
3. Press the Zero/Check Mark Button to enter the Units submenu.
The checkmark indicates the current units the Field Gauge/Process Meter is set to display.
If you do not wish to change engineering units, press the Menu/Up Arrow Button twice to return to the main pressure screen.
4. Scroll to your desired engineering unit using the right and left buttons.
5. Press the Zero/Check Mark Button to set the new unit.
Related Articles
Quick-Start Guide and User Manual for Field Gauge LC10
Download in PDF format below.Change Engineering Units on a Field Gauge LC10
Quickly switch between standard pressure and temperature engineering units, add or remove standard pressure engineering units, and add custom pressure engineering units to a Field Gauge. Things you will need in order to change displayed units on a ...Installation instructions for panel-mounting a Process Meter LC30
1. Cut holes in panel using diagram 2. Position LC30 over holes 3. Insert bolts from front and install nuts loosely in back 4. Tighten nut until snug, but not too tight 5. Connect pressure / temperature connections 6. Connect power via approved power ...Change Engineering Units on a Process Meter
Switch displayed pressure and temperature engineering units. 1. Press and Hold the Menu/Up Arrow Button. 2. Press the Backlight/Right Arrow Button to scroll to UNITS 3. Press the Zero/Check Mark Button to enter the Units submenu. The checkmark ...Calibrate the pressure sensor on a Field Gauge and Process Meter
Do-it-yourself instructions for calibrating a Ralston digital gauge with the free FieldLab Desktop software. At the end of this process, FieldLab Desktop will automatically make any necessary adjustments to bring your Ralston gauge to acceptable ...
Recent Articles
Set the logging interval for a test
Applies to FieldLab Mobile versions 2.0 and later 1. Add the pressure and/or temperature readings you need to your test. Learn how to Add Readings to a Test. 2. Tap Test 3. Tap Interval 4. Select your desired interval 5. Select Back The interval you ...Max logging durations based on interval: Quick reference table
Applies to: All Bluetooth-enabled models of Field Gauge LC20, Process Meter LC30 Ralston Field Gauge and Process Meter gauges log data to on-board memory when you start logging from the Fieldlab Mobile app. The logging interval you select determines ...Add Readings to a Test
Applies to FieldLab Mobile versions 2.0 and later. This walkthrough demonstrates how to add one pressure reading. You can add as many readings to a test as needed by repeating the steps below. 1. Connect the included Bluetooth antenna(s) to the ...Delete a Reading from the Test screen
Applies to FieldLab Mobile versions 2.0 and later 1. Tap the Reading Card 2. Tap Reading 3. Tap Delete Reading 3a. Confirm that you wish to delete.Getting Started: Run Your First Test with FieldLab Mobile
This guide walks you through connecting a gauge, logging data, and retrieving a completed test run. This walkthrough uses a single gauge, but FieldLab Mobile supports multiple gauges and readings in a single test. The following guide applies to ...