Change Logging Interval

Change Logging Interval

1. Select the Interval Settings Icon in the Logging Interval field.

Note: Logging Interval Settings cannot be changed while logging. 


2. Select the drop-down menu to choose your new Logging Interval.

Note that longer intervals will give you more time to log data before the memory is full on your Field Gauge. The FieldLab Mobile App will give you a preview of how much logging time is available for each interval setting.


3. Select the Save button to save your changes.



    • Related Articles

    • Leave Bluetooth range while connected gauges are logging

      The FieldLab Mobile app allows you to remote control logging on Bluetooth-enabled Ralston Gauges, monitor live readings, and harvest test data while within Bluetooth range, which is around 328 feet (100 meters) max.  If you take your mobile device ...

    • Change Engineering Units for Pressure or Temperature

      1. Select the Settings icon 2. Select the drop-down menu and choose the engineering units you would like to log with. 3. Select the Save button

    • Get started with FieldLab Mobile

      Check compatibility of your mobile device FieldLab Mobile runs on: iOS versions 11.0 and newer. Android versions 9 and newer. Power on your Field Gauge FieldLab Mobile works with any Bluetooth enabled Ralston Field Gauge. Download FieldLab Mobile ...

    • Recent Articles

    • Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30

      This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...

    • Operation Instructions 10,000 psi Hand Pump (Model XTHP)

      Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...

    • Operation Instructions 5000 psi Hand Pump (Model QTHP)

      Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...

    • Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth

      What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...

    • A Gauge is Overpressurized

      Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...