Change the Date and Time

Learn how to adjust the Date and Time, and formats for each, on the FieldLab Pressure Calibrator.

Easy way

If your desired date and time for the FieldLab match the current date and time on your PC, simply select "Set to PC Time" and save changes.

1

Make sure your FieldLab Pressure is Powered On, connected to your computer via the provided USB Cord, and FieldLab Desktop software is running.

2

On the Devices screen, select the FieldLab you want to administer.

3

Select the Setting Tab

4

In the Date & Time block, select the Change button.

5

Administer the Date & Time settings & Save Changes

The new settings will automatically be pushed to the connected FieldLab when you Save.

• Related Articles

• Change Last and Next Calibration Dates on a FieldLab

  Customize the last and/or next calibration date on a FieldLab. 1 Plug the FieldLab Pressure into the computer with the provided USB cord, power it on and open FieldLab Desktop software. 2 Select the FieldLab device you wish to change on the Devices ...

• Change the Active Test Mode on a FieldLab

  1. Select the Menu Button 2. Scroll to Test Modes and press the Right Arrow Button When you access the Test Modes sub-menu you can view a list of every test that has been added to the FieldLab. 3. Scroll to the Test Mode you wish to Activate by using ...

• Change Pressure Connection

  FieldLab can connect with all industry-standard connection types. This article tells you how to change out an installed pressure connection and replace it with one of many different pressure connections available for the FieldLab Pressure. 1 Use a 1 ...

• Change Wireless Channel on a FieldLab

  FieldLab software and devices are set by default to channel 26, which is the channel farthest away from most common Wi-Fi networks. That being said, electromagnetic interference can come from a wide array of devices, and changing the channel may help ...

• Clock Battery Critical

  Return instructions for getting your clock battery replaced. If your FieldLab is displaying this message, then the date & time displayed on the FieldLab screen and in saved data sets could be incorrect or unavailable until the clock battery is ...

• Recent Articles

• Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30

  This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...

• Operation Instructions 10,000 psi Hand Pump (Model XTHP)

  Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...

• Operation Instructions 5000 psi Hand Pump (Model QTHP)

  Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...

• Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth

  What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...

• A Gauge is Overpressurized

  Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...