Change units of measurement on a Ralston gauge from FieldLab Mobile App
This article is for FieldLab Mobile versions 1.5.1 and later.
1. Connect to your Ralston gauge via the FieldLab Mobile App.
2. Select the gear icon to access settings for your gauge.
3. Scroll to the sensor you wish to change measurement units for.
- If you're using a single-sensor gauge, your settings will be under the heading "Sensor A".
- If you're using a dual-sensor gauge, "Sensor A" corresponds with the sensor on your gauge that has the letter "A" laser-etched into it, and "Sensor B" corresponds with the sensor on your gauge that has the letter "B" laser-etching.
4. Select the Pressure (or Temperature) Units button to access your list of measurement units.
5. Select the new unit of measurement you wish to use.
6. Select the Back button to return to the Devices screen.
Related Articles
Get started with FieldLab Mobile
Check compatibility of your mobile device FieldLab Mobile runs on: iOS versions 11.0 and newer. Android versions 9 and newer. Power on your Field Gauge FieldLab Mobile works with any Bluetooth enabled Ralston Field Gauge. Download FieldLab Mobile ...Get FieldLab Mobile for the iPhone and iPad
Connect to and control your Ralston LC20 Field Gauges with Bluetooth, log and harvest your test data, and share logged data with your organization or client. Download on the App storeGetting Started with FieldLab Mobile App
This article is for FieldLab Mobile versions 1.5.1 and later. Establish a Bluetooth connection between FieldLab Mobile App and your Ralston gauge. Power on your Ralston gauge. Confirm that your gauge is Bluetooth enabled. Confirm that the Bluetooth ...A Gauge is Overpressurized
Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...Connect to one or more gauges with FieldLab Mobile App
Establish a Bluetooth connection between FieldLab Mobile App and your Ralston gauge. Power on your Ralston gauge. Confirm that your gauge is Bluetooth enabled. Confirm that the Bluetooth antenna is connected. On your mobile device, open the FieldLab ...
Recent Articles
Adjust the logging interval on your Ralston gauge with FieldLab Mobile App
1. Select the gear icon to access settings for your gauge. Select gear icon to access gauge settings 2. Select Logging Interval Select Logging Interval button to change interval 3. Select the new logging interval you wish to use. Each interval ...Connect to one or more gauges with FieldLab Mobile App
Establish a Bluetooth connection between FieldLab Mobile App and your Ralston gauge. Power on your Ralston gauge. Confirm that your gauge is Bluetooth enabled. Confirm that the Bluetooth antenna is connected. On your mobile device, open the FieldLab ...Hose sizing guide for testing Pressure safety valves
When performing pressure safety valve testing with the Ralston Instruments FieldLab, it's important to use a hose or pipe that matches the pressure rating and flow requirements of the test. Typically, the following sizes are recommended: - For ...Change units of measurement on a Ralston gauge from FieldLab Mobile App
This article is for FieldLab Mobile versions 1.5.1 and later. 1. Connect to your Ralston gauge via the FieldLab Mobile App. 2. Select the gear icon to access settings for your gauge. Select the gear icon to access settings for your gauge 3. Scroll to ...Getting Started with FieldLab Mobile App
This article is for FieldLab Mobile versions 1.5.1 and later. Establish a Bluetooth connection between FieldLab Mobile App and your Ralston gauge. Power on your Ralston gauge. Confirm that your gauge is Bluetooth enabled. Confirm that the Bluetooth ...