Custom Name your FieldLab
1
From the Devices screen in FieldLab Desktop, select the device you want to rename.
2
On the Overview screen, select the pencil icon.s
3
Type in your custom name and hit the return key to save it.
Related Articles
Enter Custom Information Into Data Sets on a FieldLab Pressure Calibrator
Note: You may need to perform free updates to your FieldLab and FieldLab Desktop in order to use this feature. Available for FieldLab Desktop versions 1.10.0 and newer, and FieldLab v1.117 and newer. Update Firmware Update FieldLab Desktop Enter and ...
Add Custom Data Fields to Data Sets
How to add Custom Data Fields to allow more custom information to be added to a Data Set. Note: You may need to perform free updates to FieldLab Desktop in order to use this feature. Available for FieldLab Desktop versions 1.10.0 and newer. Update ...
Quick-Start Guide and User Manual for the FieldLab Pressure Calibrator
Download in PDF format below.
FieldLab API Document
The API document allows users to communicate with a FieldLab Digital Pressure Calibrator (model FLP1). Compatible with all FieldLabs using firmware 1.126 and above PC Serial Port Settings The recommended pc serial port settings are: Baud – 9600 ...
Adjust Zoom level of Vertical Pressure Bar
Zoom in or out on the Vertical Pressure Bar on a FieldLab Digital Pressure Calibrator. The FieldLab screen has both a numeric and graphic readout to display the current pressure. The numeric readout is very precise, while the graphic readout to ...
Recent Articles
Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30
This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...
Operation Instructions 10,000 psi Hand Pump (Model XTHP)
Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...
Operation Instructions 5000 psi Hand Pump (Model QTHP)
Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...
Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth
What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...
A Gauge is Overpressurized
Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...