Delete Data Sets from FieldLab Pressure Calibrator

You can delete data sets from the FieldLab Pressure, and once they're imported, from the FieldLab Desktop application.

1

Go to the Menu List by pressing the Menu Button

2

Step down to the Data Sets list item with the Down Button and select Data Sets.

3

Select a Data Set that you'd like to Delete

4

On the Data Set detail screen, press the Down Button to Delete.

5

Confirm deletion by pressing the center Zoom Button.

• Related Articles

• Import Data Sets from a FieldLab Digital Pressure Calibrator

  What you will need The FieldLab Desktop app installed on your PC. Free download. A FieldLab with data sets saved to it. USB cord to connect the FieldLab to your PC (included with purchase of FieldLab). 1. Power On the FieldLab. 2. Open the FieldLab ...

• Enter Custom Information Into Data Sets on a FieldLab Pressure Calibrator

  Note: You may need to perform free updates to your FieldLab and FieldLab Desktop in order to use this feature. Available for FieldLab Desktop versions 1.10.0 and newer, and FieldLab v1.117 and newer. Update Firmware Update FieldLab Desktop Enter and ...

• FieldLab API Document

  The API document allows users to communicate with a FieldLab Digital Pressure Calibrator (model FLP1). Compatible with all FieldLabs using firmware 1.126 and above PC Serial Port Settings The recommended pc serial port settings are: Baud – 9600 ...

• Quick-Start Guide and User Manual for the FieldLab Pressure Calibrator

  Download in PDF format below.

• Add Custom Data Fields to Data Sets

  How to add Custom Data Fields to allow more custom information to be added to a Data Set. Note: You may need to perform free updates to FieldLab Desktop in order to use this feature. Available for FieldLab Desktop versions 1.10.0 and newer. Update ...

• Recent Articles

• Set the logging interval for a test

  Applies to FieldLab Mobile versions 2.0 and later 1. Add the pressure and/or temperature readings you need to your test. Learn how to Add Readings to a Test. 2. Tap Test 3. Tap Interval 4. Select your desired interval 5. Select Back The interval you ...

• Max logging durations based on interval: Quick reference table

  Applies to: All Bluetooth-enabled models of Field Gauge LC20, Process Meter LC30 Ralston Field Gauge and Process Meter gauges log data to on-board memory when you start logging from the Fieldlab Mobile app. The logging interval you select determines ...

• Add Readings to a Test

  Applies to FieldLab Mobile versions 2.0 and later. This walkthrough demonstrates how to add one pressure reading. You can add as many readings to a test as needed by repeating the steps below. 1. Connect the included Bluetooth antenna(s) to the ...

• Delete a Reading from the Test screen

  Applies to FieldLab Mobile versions 2.0 and later 1. Tap the Reading Card 2. Tap Reading 3. Tap Delete Reading 3a. Confirm that you wish to delete.

• Getting Started: Run Your First Test with FieldLab Mobile

  This guide walks you through connecting a gauge, logging data, and retrieving a completed test run. This walkthrough uses a single gauge, but FieldLab Mobile supports multiple gauges and readings in a single test. The following guide applies to ...