Select Preferences from the FieldLab Desktop menu
Select Export
Save the .txt file to your computer.
The default file name will be FieldLabLog.txt
Export Application Log
The application log records events in the FieldLab Desktop application. You can export the application log and share it with Ralston Customer Support in the event that there are issues with your software. This article shows you how.
Related Articles
Log pressure and/or temperature data to your computer with FieldLab Desktop
This article applies to the following products: Field Gauge LC10, all models Field Gauge LC20, all models Process Meter LC30, all models FieldLab Digital Pressure Calibrator, all models. Things you will need: A PC running Windows. FieldLab Desktop ...Log pressure and temperature on your computer with one or more Ralston gauges
Log pressure, temperature, and view live graphing from multiple Ralston Gauges on your computer using the FieldLab Desktop software app. Save all readings to one data set. This article applies to the following devices: Field Gauge LC10, all models ...Export and Share Data Sets from FieldLab Desktop
Export Data Sets from FieldLab Desktop to PDF or CSV file formats. 1 Select the Data Sets button to go the the data sets section. 2 Select the Data Set(s) you wish to export. NOTE: Use Shift-Select to select multiple Data Sets. 3 Select the Export ...Can't connect more than one Ralston device to FieldLab Desktop
FieldLab Desktop software is designed and tested to allow you to connect multiple Ralston devices both wirelessly and via USB; including FieldLabs, Field Gauges, and Process Meters. On rare occasions Windows will assign the same COM port to two ...Reset the FieldLab Desktop App to Default Settings
Learn how to reset all settings in FieldLab Desktop to the defaults, and remove all Test Modes and Data Sets from their respective libraries. 1 Select Preferences from the FieldLab Desktop menu 2 Select Reset All Settings 3 Confirm that you'd like to ...
Recent Articles
Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30
This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...Operation Instructions 10,000 psi Hand Pump (Model XTHP)
Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...Operation Instructions 5000 psi Hand Pump (Model QTHP)
Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth
What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...A Gauge is Overpressurized
Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...