Get FieldLab Mobile for the iPhone and iPad

Get FieldLab Mobile for the iPhone and iPad

Connect to and control your Ralston LC20 Field Gauges with Bluetooth, log and harvest your test data, and share logged data with your organization or client.

Download on the App store




    • Related Articles

    • Get started with FieldLab Mobile

      Check compatibility of your mobile device FieldLab Mobile runs on: iOS versions 11.0 and newer. Android versions 9 and newer. Power on your Field Gauge FieldLab Mobile works with any Bluetooth enabled Ralston Field Gauge. Download FieldLab Mobile ...

    • Export Data Sets from FieldLab Mobile App

      This article is for FieldLab Mobile App versions 1.5.1 and later Review test data 1. Select the Data Sets tab. 2. Select the Data Set you wish to view from the list. View list of saved data sets The Data Set Overview screen will display key ...

    • Getting Started with FieldLab Mobile App

      This article is for FieldLab Mobile versions 1.5.1 and later. Establish a Bluetooth connection between FieldLab Mobile App and your Ralston gauge. Power on your Ralston gauge. Confirm that your gauge is Bluetooth enabled. Confirm that the Bluetooth ...

    • Connect to one or more gauges with FieldLab Mobile App

      Establish a Bluetooth connection between FieldLab Mobile App and your Ralston gauge. Power on your Ralston gauge. Confirm that your gauge is Bluetooth enabled. Confirm that the Bluetooth antenna is connected. On your mobile device, open the FieldLab ...

    • Connect to a Bluetooth-enabled Field Gauge with the FieldLab Mobile App

      1. Power-on the Field Gauge As soon as you power on your Field Gauge, it will begin advertising its availability to connect to your FieldLab Mobile App. 2. In the FieldLab Mobile App on your mobile device, Select the Scan Button 3. Watch the Devices ...

    • Recent Articles

    • Set the logging interval for a test

      Applies to FieldLab Mobile versions 2.0 and later 1. Add the pressure and/or temperature readings you need to your test. Learn how to Add Readings to a Test. 2. Tap Test 3. Tap Interval 4. Select your desired interval 5. Select Back The interval you ...

    • Max logging durations based on interval: Quick reference table

      Applies to: All Bluetooth-enabled models of Field Gauge LC20, Process Meter LC30 Ralston Field Gauge and Process Meter gauges log data to on-board memory when you start logging from the Fieldlab Mobile app. The logging interval you select determines ...

    • Add Readings to a Test

      Applies to FieldLab Mobile versions 2.0 and later. This walkthrough demonstrates how to add one pressure reading. You can add as many readings to a test as needed by repeating the steps below. 1. Connect the included Bluetooth antenna(s) to the ...

    • Delete a Reading from the Test screen

      Applies to FieldLab Mobile versions 2.0 and later 1. Tap the Reading Card 2. Tap Reading 3. Tap Delete Reading 3a. Confirm that you wish to delete.

    • Getting Started: Run Your First Test with FieldLab Mobile

      This guide walks you through connecting a gauge, logging data, and retrieving a completed test run. This walkthrough uses a single gauge, but FieldLab Mobile supports multiple gauges and readings in a single test. The following guide applies to ...