Find the Firmware version on your FieldLab Pressure

Learn how to find out which version of Firmware is installed on your FieldLab Pressure Calibrator.

On the FieldLab

1

From the Main Pressure Screen, Press the Menu Button

2

Scroll to and select Information Screen

3

The Firmware Version of your FieldLab should appear on this screen.

On FieldLab Desktop

You can use FieldLab Desktop to determine the firmware version of your device. 

1

​From the Devices screen, select a FieldLab.

2

Your Firmware Version will appear on the Overview screen.

• Related Articles

• Find the Serial Number of a FieldLab

  On the back of a FieldLab Every FieldLab comes with a unique Serial Number printed on the lower-left corner of the metal plate secured to the back. In FieldLab Desktop App 1 On the Device Screen, select a the FieldLab Pressure device and go to the ...

• Calibrate the pressure sensor on a FieldLab

  Do-it-yourself instructions for calibrating a Ralston digital gauge with the free FieldLab Desktop software. At the end of this process, FieldLab Desktop will automatically make any necessary adjustments to bring your FieldLab to acceptable ...

• Quick-Start Guide and User Manual for the FieldLab Pressure Calibrator

  Download in PDF format below.

• Find the Max Pressure of a FieldLab Digital Pressure Calibrator

  Learn how to locate the max rated pressure for a FieldLab device. Exceeding the max rated pressure of your FieldLab could damage it and have an adverse affect on its functionality.  Ralston Instrument offers FieldLab Pressure devices in a variety of ...

• Use a FieldLab to run a valve test with manual marking of crack and reseat

  Use this article if you selected "Manual Marking of Crack and Reseat" when you created your valve test in FieldLab Desktop. The FieldLab interface is slightly different if you selected "Auto Detection of Crack and Reseat". To learn how to perform a ...

• Recent Articles

• Install Quick-test Hose on a Ralston Hose Reel

• Prevent kinks and hose jumping

  When Spooling Out When spooling the Quick-test hose out to your test area, if you are only going to spool out a portion of the hose on the reel, try applying the tension brake. The tension from the brake will prevent the remainder of the hose still ...

• Save the nitrogen in your hose reel for the next test

  If you calibrate a high number of transmitters in a week, you definitely want to conserve your nitrogen. Especially when you're so far out in the field that going back to the shop isn't an option. Blowing off 100' of nitrogen in the test hose adds up ...

• Store your Hose Reel between tests

  Each time you stow and transport your Hose Reel, reel the hose in as tightly as you can to the Hose Reel, and engage the locking pin. This will prevent the hose from uncoiling due to muscle memory and road vibrations during transport. Engage the hose ...

• Results of Calibration Test

  Results of a Calibration test using the Ralston FieldLab and supporting Desktop software.