How long do the keypads on the LC gauge last?

• Related Articles

• Quick-Start Guide and User Manual for Field Gauge LC10

  Download in PDF format below.

• Installation instructions for panel-mounting a Process Meter LC30

  1. Cut holes in panel using diagram 2. Position LC30 over holes 3. Insert bolts from front and install nuts loosely in back 4. Tighten nut until snug, but not too tight 5. Connect pressure / temperature connections 6. Connect power via approved power ...

• Calibrate the pressure sensor on a Field Gauge and Process Meter

  Do-it-yourself instructions for calibrating a Ralston digital gauge with the free FieldLab Desktop software. At the end of this process, FieldLab Desktop will automatically make any necessary adjustments to bring your Ralston gauge to acceptable ...

• How to tell if your Field Gauge model can communicate wirelessly with Bluetooth

  Many customers own multiple Field Gauges, each with different configurations and features. A quick way to determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...

• Overview Video Field Gauge LC20

  Field Gauge LC20 basic operation and features overview.

• Recent Articles

• How to Place an Order Using the Ralston Instruments Distributor Portal

  Purpose: This article explains how Ralston Instruments distributors can efficiently place an order using the Ralston Instruments Distributor Portal. Note that this is only available to users who are employees of authorized Ralston Instruments ...

• How to Request a Quote from Ralston Instruments

  Overview At Ralston Instruments, we aim to make the quote request process as streamlined as possible for both end users and distributors. This guide outlines the steps for each group to request a quote efficiently. For End Users End users are ...

• Calibrate the pressure sensor on a Field Gauge and Process Meter

  Do-it-yourself instructions for calibrating a Ralston digital gauge with the free FieldLab Desktop software. At the end of this process, FieldLab Desktop will automatically make any necessary adjustments to bring your Ralston gauge to acceptable ...

• How long do the keypads on the LC gauge last?

  The keypad buttons on the LC10, LC20 and LC30 gauges last typically 5-10 million cycles. This varies depending on the ambient temperature as well as the force with which the buttons are pushed.

• How National Pipe Thread (NPT) works

  NPT (National Pipe Tapered) threads are a standard used in the U.S. for connecting pipes and fittings. They are designed with a taper meaning that as you screw the male thread into the female thread, the diameter decreases and the threads become ...