Install FieldLab Desktop on your computer
Computer Requirements: Any PC running Windows 10 or greater.
- Download FieldLab Desktop. Go to www.ralstonfieldlab.com/desktop and download the latest version. If you don't already have an account, you can create one.
- Once downloaded, open the installer and follow the instructions on your screen.
Related Articles
Install USB Driver
If you're having trouble getting your FieldLab connected to the PC with the provided USB cord, you may need to reinstall the Windows driver for the device. Installing drivers requires you to be a Windows administrator. 1 Open FieldLab Desktop on your ...Log pressure and/or temperature data to your computer with FieldLab Desktop
Monitor and log pressure and temperature data to your computer with one or more Ralston Gauges. This article applies to the following products: Field Gauge LC10, all models Field Gauge LC20, all models Process Meter LC30, all models FieldLab Digital ...How to connect your gauges to FieldLab Desktop
Links to instructions for connecting Ralston gauges to FieldLab Desktop versions 2.0 and later. If you have the FieldLab Desktop App installed on your computer, update to the latest version from within the app. If not, the software is free and can be ...Update tests on your FieldLab after editing in the FieldLab Desktop app
Instructions for FieldLab Desktop versions 2.0 and later Editing a Test Mode in the FieldLab Desktop app updates the copy saved in the app, but not the copy already on any FieldLab. If the edited Test Mode is already installed on a FieldLab Pressure ...Remove zero offsets on a gauge with FieldLab Desktop
This article applies to all Ralston gauges that have a pressure sensor installed. The remove zero offset feature is available in FieldLab Desktop versions 2.0 and later. If you have the FieldLab Desktop App installed on your computer, update to the ...
Recent Articles
Set the logging interval for a test
Applies to FieldLab Mobile versions 2.0 and later 1. Add the pressure and/or temperature readings you need to your test. Learn how to Add Readings to a Test. 2. Tap Test 3. Tap Interval 4. Select your desired interval 5. Select Back The interval you ...Max logging durations based on interval: Quick reference table
Applies to: All Bluetooth-enabled models of Field Gauge LC20, Process Meter LC30 Ralston Field Gauge and Process Meter gauges log data to on-board memory when you start logging from the Fieldlab Mobile app. The logging interval you select determines ...Add Readings to a Test
Applies to FieldLab Mobile versions 2.0 and later. This walkthrough demonstrates how to add one pressure reading. You can add as many readings to a test as needed by repeating the steps below. 1. Connect the included Bluetooth antenna(s) to the ...Delete a Reading from the Test screen
Applies to FieldLab Mobile versions 2.0 and later 1. Tap the Reading Card 2. Tap Reading 3. Tap Delete Reading 3a. Confirm that you wish to delete.Getting Started: Run Your First Test with FieldLab Mobile
This guide walks you through connecting a gauge, logging data, and retrieving a completed test run. This walkthrough uses a single gauge, but FieldLab Mobile supports multiple gauges and readings in a single test. The following guide applies to ...