If you calibrate a high number of transmitters in a week, you definitely want to conserve your nitrogen. Especially when you're so far out in the field that driving back to the shop isn't an option. Blowing off 100' of nitrogen in the test hose adds ...
When Spooling Out When spooling the Quick-test hose out to your test area, if you are only going to spool out a portion of the hose on the reel, try applying the tension brake. The tension from the brake will prevent the remainder of the hose still ...
Each time you stow and transport your Hose Reel, reel the hose in as tightly as you can to the Hose Reel, and engage the locking pin. This will prevent the hose from uncoiling due to muscle memory and road vibrations during transport. Engage the hose ...
Applies to FieldLab Mobile versions 2.0 and later 1. Add the pressure and/or temperature readings you need to your test. Learn how to Add Readings to a Test. 2. Tap Test 3. Tap Interval 4. Select your desired interval 5. Select Back The interval you ...
Applies to: All Bluetooth-enabled models of Field Gauge LC20, Process Meter LC30 Ralston Field Gauge and Process Meter gauges log data to on-board memory when you start logging from the Fieldlab Mobile app. The logging interval you select determines ...
Applies to FieldLab Mobile versions 2.0 and later. This walkthrough demonstrates how to add one pressure reading. You can add as many readings to a test as needed by repeating the steps below. 1. Connect the included Bluetooth antenna(s) to the ...
This guide walks you through connecting a gauge, logging data, and retrieving a completed test run. This walkthrough uses a single gauge, but FieldLab Mobile supports multiple gauges and readings in a single test. The following guide applies to ...