Link to Field Gauge to FieldLab Desktop

Link a Field Gauge, Process Meter, or FieldLab to FieldLab Desktop so you can manage setting, get the latest firmware updates, and log data directly to your computer from the Field Gauge.

This article applies to Ralston Field Gauge LC10, LC20, Process Meter LC30, and FieldLab, all models.

Things you will need: 

1. A PC running Windows. 
   
2. FieldLab Desktop software version 1.24 or later installed on your PC. Download the latest version for free.
   
3. A Ralston Instruments Field Gauge LC10, LC20, Process Meter LC30, or FieldLab.
   
4. USB Cord (Type Micro B), provided with your purchase.
   

1. Download and install the latest version of FieldLab Desktop.

2. Open the FieldLab Desktop app on your computer.

3. Connect to your computer with the provided USB Cable.

4. Power on the your Ralston device by holding down the Power button for three seconds.

5. In FieldLab Desktop, on the Devices screen, select the button titled "Link a Device".

6. FieldLab Desktop will ask you if you’d like to link this device. Select the button titled “Link to this PC”.

7. Confirm that you want to link by selecting the button “Link to this PC”.

8. Once the linking process is complete, select the button titled “Done”.

Congratulations! You can now manage your device settings, log data directly to your computer, and update firmware with FieldLab Desktop.

• Related Articles

• Calibrate the pressure sensor on a Field Gauge

  Calibrate the pressure sensor on a Field Gauge, Process Meter, and FieldLab with FieldLab Desktop.

• Calibrate the pressure sensor on a Field Gauge LC20

  Calibrate the pressure sensor on a Field Gauge, Process Meter, and FieldLab with FieldLab Desktop.

• Quick-Start Guide and User Manual for Field Gauge LC10

  Download in PDF format below.

• Link to Field Gauge LC20 to FieldLab Desktop

  Link a Field Gauge, Process Meter, or FieldLab to FieldLab Desktop so you can manage setting, get the latest firmware updates, and log data directly to your computer from the Field Gauge. This article applies to Ralston Field Gauge LC10, LC20, ...

• Link Process Meter to FieldLab Desktop

  Link a Field Gauge, Process Meter, or FieldLab to FieldLab Desktop so you can manage setting, get the latest firmware updates, and log data directly to your computer from the Field Gauge. This article applies to Ralston Field Gauge LC10, LC20, ...

• Recent Articles

• Use a FieldLab to run a valve test with manual marking of crack and reseat

  Use this article if you selected "Manual Marking of Crack and Reseat" when you created your valve test in FieldLab Desktop. The FieldLab interface is slightly different if you selected "Auto Detection of Crack and Reseat". To learn how to perform a ...

• How to obtain a Return Material Authorization (RMA) to return a product to Ralston Instruments

  If you have an issue with a Ralston Instruments product we would recommend that you go to our Knowledgebase. If you have done this and still have an issue please go to our Website at www.ralstoninst.com and browse to Support. Under Support you will ...

• Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30

  This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...

• Operation Instructions 10,000 psi Hand Pump (Model XTHP)

  Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...

• Operation Instructions 5000 psi Hand Pump (Model QTHP)

  Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...