Overview of the information on a FieldLab Pressure Calibrator screen
- Test Mode Name
- Data Logging in Progress
- Calibration Test In Progress
- Wireless Connection to FieldLab Desktop
- USB Connection to FieldLab Desktop
- Battery Charge
- Time Between Logging Pressure Points
- Highest Pressure / Lowest Pressure
- Name of Data Set where logged pressure data will be saved
- Current pressure, digital readout
- Current pressure, analog readout
- Pressure Units
- Action Hints
Recent Articles
Set the logging interval for a test
Applies to FieldLab Mobile versions 2.0 and later 1. Add the pressure and/or temperature readings you need to your test. Learn how to Add Readings to a Test. 2. Tap Test 3. Tap Interval 4. Select your desired interval 5. Select Back The interval you ...
Max logging durations based on interval: Quick reference table
Applies to: All Bluetooth-enabled models of Field Gauge LC20, Process Meter LC30 Ralston Field Gauge and Process Meter gauges log data to on-board memory when you start logging from the Fieldlab Mobile app. The logging interval you select determines ...
Add Readings to a Test
Applies to FieldLab Mobile versions 2.0 and later. This walkthrough demonstrates how to add one pressure reading. You can add as many readings to a test as needed by repeating the steps below. 1. Connect the included Bluetooth antenna(s) to the ...
Delete a Reading from the Test screen
Applies to FieldLab Mobile versions 2.0 and later 1. Tap the Reading Card 2. Tap Reading 3. Tap Delete Reading 3a. Confirm that you wish to delete.
Getting Started: Run Your First Test with FieldLab Mobile
This guide walks you through connecting a gauge, logging data, and retrieving a completed test run. This walkthrough uses a single gauge, but FieldLab Mobile supports multiple gauges and readings in a single test. The following guide applies to ...