Register a FieldLab

This article applies to:

• FieldLab, all models.
• Field Gauge, all models.

1

Open FieldLab Desktop software on your computer.

If you haven't done so yet, download and install FieldLab Desktop.

2

Connect the FieldLab device to the computer with the provided USB cable and power it on.

3

Select Get Started

4

Select Link a Device

5

Select Register this FieldLab

6

If the "Product Owner" information is correct, select Register

7

Once the registration process is complete, you can view the newly added FieldLab on the Devices screen

• Related Articles

• Quick-Start Guide and User Manual for the FieldLab Pressure Calibrator

  Download in PDF format below.

• Adjust Zoom level of Vertical Pressure Bar

  Zoom in or out on the Vertical Pressure Bar on a FieldLab Digital Pressure Calibrator. The FieldLab screen has both a numeric and graphic readout to display the current pressure. The numeric readout is very precise, while the graphic readout to ...

• Adjust Damping on a FieldLab Display

  Ralston FieldLab Digital Pressure Calibrators are capable of displaying pressure changes close to real-time, which in some situations is faster than the human eye can register. This article shows you how to slow down and speed up the rate of pressure ...

• Find the Serial Number of a FieldLab

  On the back of a FieldLab Every FieldLab comes with a unique Serial Number printed on the lower-left corner of the metal plate secured to the back. In FieldLab Desktop App 1 On the Device Screen, select a the FieldLab Pressure device and go to the ...

• Zero a FieldLab

  Reset the FieldLab pressure readout to zero when there is no pressure applied to it. Sometimes, due to atmospheric pressure, the FieldLab will show a negative or positive pressure when there isn't actually any pressure applied to it. When that ...

• Recent Articles

• Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30

  This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...

• Operation Instructions 10,000 psi Hand Pump (Model XTHP)

  Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...

• Operation Instructions 5000 psi Hand Pump (Model QTHP)

  Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...

• Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth

  What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...

• A Gauge is Overpressurized

  Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...