Register your Field Gauge to access calibration certificates and install firmware updates.
This article applies to Ralston Field Gauge LC10, LC20, and Process Meter LC30, all models.
Things you will need:
- A PC running Windows.
- FieldLab Desktop software version 1.24 or later installed on your PC. Download the latest version for free.
- A Ralston Instruments Field Gauge.
- USB Cord, provided with your Field Gauge.
1. Download and install the latest version of FieldLab Desktop.
2. Open the FieldLab app on your PC.
3. Power on your Field Gauge and connect it to your PC with the provided USB Cord.
4. If you have not already done so, link the Field Gauge to FieldLab Desktop.
On the Devices screen in FieldLab Desktop, select the button titled "Link a Device".
5. Sign in to your FieldLab account.
If you don’t already have an account, create one.
6. Once you've signed in, go to the Devices screen, select the Field Gauge you want to register.
7. On the Overview Tab screen, select the button titled "Register".
8. Review the registration information and select the button titled "Register"
Congratulations! You can now access you calibration certificates for this device and install firmware updates.
Recent Articles
Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30
This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...
Operation Instructions 10,000 psi Hand Pump (Model XTHP)
Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...
Operation Instructions 5000 psi Hand Pump (Model QTHP)
Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...
Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth
What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...
A Gauge is Overpressurized
Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...