Sync Tests between FieldLab Desktop and your Ralston Gauges

Use FieldLab Desktop to sync Test Modes on your FieldLab devices.

Test Modes are stored and managed in the Test Modes Library, which can be found in the FieldLab Desktop application (Free to download and use). Custom Test Modes can be added to multiple FieldLab devices.

When you edit a Test Mode in FieldLab Desktop, you must then sync it with each FieldLab device that has that Test Mode.

1

With FieldLab Desktop open on the computer, plug in the FieldLab with the provided USB cord and Power it On.

2

Go to the Devices screen and select the FieldLab you wish to Sync.

An orange dot will appear next to any Ralston Gauges that need to be Synced.

3

Select the Sync Button.

4

Select Done once syncing is complete.

Repeat Steps 1 through 4 for each FieldLab that requires Syncing.

• Related Articles

• Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth

  What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...

• Can't connect more than one Ralston device to FieldLab Desktop

  FieldLab Desktop software is designed and tested to allow you to connect multiple Ralston devices both wirelessly and via USB; including FieldLabs, Field Gauges, and Process Meters. On rare occasions Windows will assign the same COM port to two ...

• Link a Ralston device to FieldLab Desktop

  Manage settings and update firmware on a Field Gauge, FieldLab, or Process Meter by linking it to FieldLab Desktop software on your computer. 1. Download and install the latest version of FieldLab Desktop. You will need FieldLab Desktop version 1.24 ...

• Change Display Sleep Timer on a FieldLab for a Data Logging Test

  When you Activate a Test Mode on a FieldLab Digital Pressure Calibrator, the settings for that Test Mode will apply to the FieldLab as long as that Test Mode is active. Each Test Mode has its own Auto Display Sleep settings. You can use FieldLab ...

• Create a new Hydrostatic Test in FieldLab Desktop

  Create a custom hydrostatic test in FieldLab Desktop to run on a FieldLab. Overview This article will show you how to create a Hydrostatic Test in FieldLab Desktop.  Once you create it, you can use a FieldLab and one or more Field Gauges/Process ...

• Recent Articles

• How to Place an Order Using the Ralston Instruments Distributor Portal

  Purpose: This article explains how Ralston Instruments distributors can efficiently place an order using the Ralston Instruments Distributor Portal. Note that this is only available to users who are employees of authorized Ralston Instruments ...

• How to Request a Quote from Ralston Instruments

  Overview At Ralston Instruments, we aim to make the quote request process as streamlined as possible for both end users and distributors. This guide outlines the steps for each group to request a quote efficiently. For End Users End users are ...

• Calibrate the pressure sensor on a Field Gauge and Process Meter

  Do-it-yourself instructions for calibrating a Ralston digital gauge with the free FieldLab Desktop software. At the end of this process, FieldLab Desktop will automatically make any necessary adjustments to bring your Ralston gauge to acceptable ...

• How long do the keypads on the LC gauge last?

  The keypad buttons on the LC10, LC20 and LC30 gauges last typically 5-10 million cycles. This varies depending on the ambient temperature as well as the force with which the buttons are pushed.

• How National Pipe Thread (NPT) works

  NPT (National Pipe Tapered) threads are a standard used in the U.S. for connecting pipes and fittings. They are designed with a taper meaning that as you screw the male thread into the female thread, the diameter decreases and the threads become ...