Update Process Meter Firmware
Ralston Instruments will periodically release updated firmware containing improvements and new features. This article will demonstrate the steps you can take to keep your firmware up to date.
What you will need:
- A PC running Windows.
- FieldLab Desktop software version 1.24 or later installed on your PC. Download the latest version for free.
- A Ralston Instruments Process Meter
- USB Cord, provided with your Process Meter.
1. Download and install the latest version of FieldLab Desktop.
Requires FieldLab Desktop software version 1.24 or later installed on your PC. Download the latest version for free.
2. Open the FieldLab Desktop app on your PC.
3. Connect the Process Meter to your PC with the provided USB Cable.
4. Power on the Process Meter.
5. Select the device you wish to update from the Devices screen in FieldLab Desktop.
6. Select the Overview Tab.
7. Confirm that a new firmware update is available.
8. Sign in to your FieldLab Account.
You can create a new account from this screen if you don’t have one already.
9. Register your Process Meter if you haven't already.
10. In the "Firmware Update Available" module, select the "Update" button and follow the on-screen instructions in FieldLab Desktop.
Related Articles
Use Update Mode to Update Firmware
Update Mode is a troubleshooting shortcut that allows you to manually update the Process Meter firmware at any time. 1. Power off the Process Meter. 2. Connect the Process Meter with the provided USB cord to your PC running FieldLab Desktop. You can ...Installation instructions for panel-mounting a Process Meter LC30
1. Cut holes in panel using diagram 2. Position LC30 over holes 3. Insert bolts from front and install nuts loosely in back 4. Tighten nut until snug, but not too tight 5. Connect pressure / temperature connections 6. Connect power via approved power ...View Firmware Version on a Field Gauge LC20 and Process Meter LC30
Ralston Instruments continually releases updates that improve the features of your Ralston Gauge with new firmware releases, which you can update for free. This article shows you how to see what version of firmware is installed on your Field Gauge ...Update Field Gauge Firmware
Ralston Instruments will periodically release updated firmware containing improvements and new features. This article will demonstrate the steps you can take to keep your firmware up to date. What you will need: A PC running Windows. ...Update Field Gauge LC20 Firmware
Ralston Instruments will periodically release updated firmware containing improvements and new features. This article will demonstrate the steps you can take to keep your firmware up to date. What you will need: A PC running Windows. ...
Recent Articles
Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30
This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...Operation Instructions 10,000 psi Hand Pump (Model XTHP)
Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...Operation Instructions 5000 psi Hand Pump (Model QTHP)
Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth
What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...A Gauge is Overpressurized
Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...