Use Update Mode to Update Firmware

Use Update Mode to Update Firmware

Update Mode is a troubleshooting shortcut that allows you to manually update the Field Gauge firmware at any time.

1. Power off the Field Gauge.



2. Connect the Field Gauge with the provided USB cord to your PC running FieldLab Desktop.

You can download the latest version for free.

3. Power on the Field Gauge while holding down both the Backlight Button and the Power Button for 5 seconds.

Press the Backlight Button and the Power Button at the same time.



4. Watch the FieldLab Desktop screen and follow the instructions.

    • Related Articles

    • Use Update Mode to Update Firmware

      Update Mode is a troubleshooting shortcut that allows you to manually update the Process Meter firmware at any time. 1. Power off the Process Meter. 2. Connect the Process Meter with the provided USB cord to your PC running FieldLab Desktop. You can ...

    • Use Update Mode to Update Firmware

      Update Mode is a troubleshooting shortcut that allows you to manually update the Field Gauge firmware at any time. 1. Power off the Field Gauge. 2. Connect the Field Gauge with the provided USB cord to your PC running FieldLab Desktop. You can ...

    • Update Process Meter Firmware

      Ralston Instruments will periodically release updated firmware containing improvements and new features. This article will demonstrate the steps you can take to keep your firmware up to date. What you will need:  A PC running Windows.  ...

    • Update Field Gauge Firmware

      Ralston Instruments will periodically release updated firmware containing improvements and new features. This article will demonstrate the steps you can take to keep your firmware up to date. What you will need:  A PC running Windows.  ...

    • Update Field Gauge LC20 Firmware

      Ralston Instruments will periodically release updated firmware containing improvements and new features. This article will demonstrate the steps you can take to keep your firmware up to date. What you will need: A PC running Windows. FieldLab Desktop ...

    • Recent Articles

    • Install Quick-test Hose on a Ralston Hose Reel

    • Prevent kinks and hose jumping

      When Spooling Out When spooling the Quick-test hose out to your test area, if you are only going to spool out a portion of the hose on the reel, try applying the tension brake. The tension from the brake will prevent the remainder of the hose still ...

    • Save the nitrogen in your hose reel for the next test

      If you calibrate a high number of transmitters in a week, you definitely want to conserve your nitrogen. Especially when you're so far out in the field that going back to the shop isn't an option. Blowing off 100' of nitrogen in the test hose adds up ...

    • Store your Hose Reel between tests

      Each time you stow and transport your Hose Reel, reel the hose in as tightly as you can to the Hose Reel, and engage the locking pin. This will prevent the hose from uncoiling due to muscle memory and road vibrations during transport. Engage the hose ...

    • Results of Calibration Test

      Results of a Calibration test using the Ralston FieldLab and supporting Desktop software.