View and Edit Custom Tests you've created in FieldLab Desktop

View the contents of the Test Modes Library with FieldLab Desktop.

View all available Test Modes

You can browse all the Test Modes that have been created, regardless of whether they're added to any devices, in the Test Modes Library with FieldLab Desktop.

1

Select Test Modes.

2

View available Test Modes.

You can view existing Test Modes from the column at the left. Selecting a Test Mode will reveal the specifications in the right pane, and enable you to Edit or Delete it. 

• Related Articles

• Create Custom Engineering Units

  Learn how to create custom engineering units on the FieldLab Desktop App and add them to your Tests. Update or download & install the latest version of the FieldLab Desktop app on your Windows computer to Version 1.40.4 or later. Update FieldLab ...

• Create Custom Pressure Units for a Ralston Gauge

  This article applies to: Field Gauge. All models equipped with a pressure sensor. FieldLab. All models. What you will need:  A PC running Windows.  FieldLab Desktop software version 1.24 or later installed on your PC. Download the latest version for ...

• Create Custom Engineering Units

  Learn how to create custom engineering units on the FieldLab Desktop software and add them to your Ralston devices. 1. From the "FieldLab Desktop" menu, select "Preferences" 2. Select "Custom Units" 3. In the Custom Units dialog box, choose "New" for ...

• Edit an existing Test

  Any existing Test can be revised with FieldLab Desktop. 1 Select the Test Modes Button. 2 Select the Test Mode you wish to edit from the list in the left column. 3 Select the Edit Button. 4 Make the necessary revisions to the Test Mode. 5 Save your ...

• Add Custom Data Fields to a Test

  Note: You may need to perform free updates to your FieldLab and FieldLab Desktop in order to use this feature. Available for FieldLab Desktop versions 1.10.0 and newer, and FieldLab Pressure Calibrator firmware v1.117 and newer.   Instructions for ...

• Recent Articles

• Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30

  This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...

• Operation Instructions 10,000 psi Hand Pump (Model XTHP)

  Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...

• Operation Instructions 5000 psi Hand Pump (Model QTHP)

  Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...

• Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth

  What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...

• A Gauge is Overpressurized

  Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...