View Device Information on a FieldLab
Related Articles
Quick-Start Guide and User Manual for the FieldLab Pressure Calibrator
Download in PDF format below.
Adjust Zoom level of Vertical Pressure Bar
Zoom in or out on the Vertical Pressure Bar on a FieldLab Digital Pressure Calibrator. The FieldLab screen has both a numeric and graphic readout to display the current pressure. The numeric readout is very precise, while the graphic readout to ...
Enter Custom Information Into Data Sets on a FieldLab Pressure Calibrator
Note: You may need to perform free updates to your FieldLab and FieldLab Desktop in order to use this feature. Available for FieldLab Desktop versions 1.10.0 and newer, and FieldLab v1.117 and newer. Update Firmware Update FieldLab Desktop Enter and ...
View available engineering units installed on FieldLab
Quickly see what engineering units are available on the FieldLab. 1 Press the Menu Button 2 Navigate to the Units menu item and press the Right Arrow Button. 3 View the Engineering Units available on the FieldLab. You can add and remove available ...
Register a FieldLab
This article applies to: FieldLab, all models. Field Gauge, all models. 1 Open FieldLab Desktop software on your computer. If you haven't done so yet, download and install FieldLab Desktop. 2 Connect the FieldLab device to the computer with the ...
Recent Articles
Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30
This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...
Operation Instructions 10,000 psi Hand Pump (Model XTHP)
Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...
Operation Instructions 5000 psi Hand Pump (Model QTHP)
Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...
Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth
What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...
A Gauge is Overpressurized
Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...