Warnings for FieldLab Digital Pressure Calibrator

Warnings for FieldLab Digital Pressure Calibrator

WARNING: DO NOT CHARGE BATTERY IN CLASS I, DIV 1/ZONE 0 HAZARDOUS LOCATIONS.

WARNING: DO NOT CONNECT TO USB PORT IN HAZARDOUS LOCATIONS.

WARNING: DO NOT CONNECT TO POWER PORT IN CLASS I, DIV 1/ZONE 0 HAZARDOUS LOCATIONS.

WARNING: EXPLOSION HAZARD. IN DIVISION 2 LOCATIONS DO NOT DISCONNECT POWER PORT WHILE THE CIRCUIT IS LIVE UNLESS THE AREA IS KNOWN TO BE FREE OF IGNITABLE CONCENTRATIONS.

WARNING: DO NOT REMOVE OR REPLACE BATTERY OR RF MODULE IN HAZARDOUS LOCATIONS.

WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY

WARNING: TO PREVENT IGNITION OF FLAMMABLE OR COMBUSTIBLE ATMOSPHERES, DISCONNECT POWER BEFORE SERVICING

    • Recent Articles

    • How to Place an Order Using the Ralston Instruments Distributor Portal

      Purpose: This article explains how Ralston Instruments distributors can efficiently place an order using the Ralston Instruments Distributor Portal. Note that this is only available to users who are employees of authorized Ralston Instruments ...

    • How to Request a Quote from Ralston Instruments

      Overview At Ralston Instruments, we aim to make the quote request process as streamlined as possible for both end users and distributors. This guide outlines the steps for each group to request a quote efficiently. For End Users End users are ...

    • Calibrate the pressure sensor on a Field Gauge and Process Meter

      Do-it-yourself instructions for calibrating a Ralston digital gauge with the free FieldLab Desktop software. At the end of this process, FieldLab Desktop will automatically make any necessary adjustments to bring your Ralston gauge to acceptable ...

    • How long do the keypads on the LC gauge last?

      The keypad buttons on the LC10, LC20 and LC30 gauges last typically 5-10 million cycles. This varies depending on the ambient temperature as well as the force with which the buttons are pushed.

    • How National Pipe Thread (NPT) works

      NPT (National Pipe Tapered) threads are a standard used in the U.S. for connecting pipes and fittings. They are designed with a taper meaning that as you screw the male thread into the female thread, the diameter decreases and the threads become ...