Connect to one or more gauges with FieldLab Mobile App
Establish a Bluetooth connection between FieldLab Mobile App and your Ralston gauge.
Power on your Ralston gauge.
- Confirm that your gauge is Bluetooth enabled.
- Confirm that the Bluetooth antenna is connected.
On your mobile device, open the FieldLab Mobile app.
When prompted, allow FieldLab Mobile to use Bluetooth on your mobile device.
Scan for available Ralston gauges
Select the Scan button to locate available gauges.
Connect to the gauge
You can connect to multiple gauges at once, if they are available.
Related Articles
Get FieldLab Mobile for the iPhone and iPad
Connect to and control your Ralston LC20 Field Gauges with Bluetooth, log and harvest your test data, and share logged data with your organization or client. Download on the App storeGet started with FieldLab Mobile
Check compatibility of your mobile device FieldLab Mobile runs on: iOS versions 11.0 and newer. Android versions 9 and newer. Power on your Field Gauge FieldLab Mobile works with any Bluetooth enabled Ralston Field Gauge. Download FieldLab Mobile ...Connect to a Bluetooth-enabled Field Gauge with the FieldLab Mobile App
1. Power-on the Field Gauge As soon as you power on your Field Gauge, it will begin advertising its availability to connect to your FieldLab Mobile App. 2. In the FieldLab Mobile App on your mobile device, Select the Scan Button 3. Watch the Devices ...Getting Started with FieldLab Mobile App
This article is for FieldLab Mobile versions 1.5.1 and later. Establish a Bluetooth connection between FieldLab Mobile App and your Ralston gauge. Power on your Ralston gauge. Confirm that your gauge is Bluetooth enabled. Confirm that the Bluetooth ...Adjust Damping on your Ralston Gauge
Damping slows the visual updates of a pressure gauge’s reading. The goal is to minimize minor fluctuations of the pressure reading on the screen caused by subtle variations in pressure that may create unwanted visual noise. Ralston gauges are set to ...
Recent Articles
Max logging durations based on interval: Quick reference table
Applies to: All Bluetooth-enabled models of Field Gauge LC20, Process Meter LC30 Ralston Field Gauge and Process Meter gauges log data to on-board memory when you start logging from the Fieldlab Mobile app. The logging interval you select determines ...Add Readings to a Test
Applies to FieldLab Mobile versions 2.0 and later. This walkthrough demonstrates how to add one pressure reading. You can add as many readings to a test as needed by repeating the steps below. 1. Connect the included Bluetooth antenna(s) to the ...Delete a Reading from the Test screen
Applies to FieldLab Mobile versions 2.0 and later 1. Tap the Reading Card 2. Tap Reading 3. Tap Delete Reading 3a. Confirm that you wish to delete.Getting Started: Run Your First Test with FieldLab Mobile
This guide walks you through connecting a gauge, logging data, and retrieving a completed test run. This walkthrough uses a single gauge, but FieldLab Mobile supports multiple gauges and readings in a single test. The following guide applies to ...Update custom unit edits on your Field Gauge and Process Meter
Applies to FieldLab Desktop app versions 2.0 and later Learn how to: Create a custom pressure unit in FieldLab Desktop When you edit and save an existing custom unit, it will need to be manually updated on any Field Gauge or Process Meter that had ...