Popular Articles
Replace Batteries in a Field Gauge LC10
Power off the gauge. Remove the four screws from the back of the gauge with a 2mm hex key/Allen wrench or Phillips-head screwdriver. Older models shipped with hexagonal sockets, newer models ship with Phillips-head screws. Remove the back panel. ...
Installation instructions for panel-mounting a Process Meter LC30
1. Cut holes in panel using diagram 2. Position LC30 over holes 3. Insert bolts from front and install nuts loosely in back 4. Tighten nut until snug, but not too tight 5. Connect pressure / temperature connections 6. Connect power via approved power ...
Install FieldLab Desktop on your computer
Computer Requirements: Any PC running Windows 10 or greater. Download FieldLab Desktop. Go to www.ralstonfieldlab.com/desktop and download the latest version. If you don't already have an account, you can create one. Once downloaded, open the ...
Pair a new temperature probe
How to pair a replacement temperature probe with a Ralston Gauge Note: These instructions apply only to replacement temperature probes manufactured by Ralston Instruments. Temperature Probe product information page: PT100 IEC Class A RTD Probe with ...
Battery Life
Battery Life of a FieldLab Digital Pressure Calibrator From a fully charged battery: Approximately 72 Hours with backlight on 2,016 Hours with display in sleep mode.