Activate a Test Mode on your FieldLab Pressure Calibrator

You can save up to 16 different Test Modes to your FieldLab Pressure. Learn how to locate and activate the Test Mode you need.

Note: You can create and add new Test Modes to your FieldLab Pressure with FieldLab Desktop. Instructions for doing so are here: 

Create a new Calibration Test

Create a new Data Logging Test

Add Test Modes to a FieldLab.

1

Press the Menu Button

2

Select Test Modes

3

Scroll to highlight the name of the Test Mode you'd like to Activate.

4

Press the Zoom Button to Activate the Test Mode.

You will be returned to the main pressure screen with the Test Mode activated. Once you're ready, you can press the Log Button to start the logging or calibration process.

• Related Articles

• Create a custom Pressure Safety Valve / Pressure Relief Valve Test for a FieldLab

  Learn how to create a new PSV/PRV Test in FieldLab Desktop. Add your test to a FieldLab Pressure Calibrator to perform tests on pressure safety and pressure relief valves. This features requires FieldLab Desktop version 1.24.0 or later. Download the ...

• Change Display Sleep Timer on a FieldLab for a Data Logging Test

  When you Activate a Test Mode on a FieldLab Digital Pressure Calibrator, the settings for that Test Mode will apply to the FieldLab as long as that Test Mode is active. Each Test Mode has its own Auto Display Sleep settings. You can use FieldLab ...

• PSV/PRV Test Setup: Quick Overview

  Overview of the PSV/PRV Test Modes settings screen in FieldLab Desktop. This features requires FieldLab Desktop 1.24.0 or later. Download the latest version for free. Test Mode Name: Name your test mode. The name you select will help you identify ...

• Edit an existing Test

  Any existing Test can be revised with FieldLab Desktop. 1 Select the Test Modes Button. 2 Select the Test Mode you wish to edit from the list in the left column. 3 Select the Edit Button. 4 Make the necessary revisions to the Test Mode. 5 Save your ...

• Add Custom Data Fields to a Test

  Note: You may need to perform free updates to your FieldLab and FieldLab Desktop in order to use this feature. Available for FieldLab Desktop versions 1.10.0 and newer, and FieldLab Pressure Calibrator firmware v1.117 and newer.   Instructions for ...

• Recent Articles

• Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30

  This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...

• Operation Instructions 10,000 psi Hand Pump (Model XTHP)

  Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...

• Operation Instructions 5000 psi Hand Pump (Model QTHP)

  Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...

• Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth

  What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...

• A Gauge is Overpressurized

  Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...