Enter Custom Information Into Data Sets on a FieldLab Pressure Calibrator
Note: You may need to perform free updates to your FieldLab and FieldLab Desktop in order to use this feature.
Available for FieldLab Desktop versions 1.10.0 and newer, and FieldLab v1.117 and newer.
Update Firmware
Update FieldLab Desktop
Enter and save important information along with each Data Set by creating custom fields that you can edit directly on the FieldLab. For example: After you complete a test on the FieldLab, you can add the serial number of the device you tested, name of the technician who performed the work, work order number, etc.
Once saved, the information will be conveniently bundled alongside all the test data for future reference.
To use Custom Data Fields, they must first be added to the Test Mode. Learn how, here: Add Custom Data Fields to a Test Mode.
Perform the Test
On the FieldLab, activate a Test Mode with a Custom Data Field on the gauge and perform the test.
Learn how to Activate a Test Mode on your FieldLab Pressure Calibrator.
View and edit the Data Set
After the test is complete, view the Data Set containing the data from the test you just performed. You can view the custom fields you assigned to the Test Mode here. In this example the custom field label, Serial Number, is visible with a blank placeholder for the data to be entered. To add info to the custom data field, select Edit.
Select the Custom Data Field you wish to edit from the list.
Input the information using the on-screen keypad.
Select “OK” to save.
View the Custom Data Field
The information will be saved in the Data Set along with your test data. You can view the saved info in the Data Set on the FieldLab, on FieldLab Desktop (once the Data Set is imported), and in the Exported Data Set file.
Related Articles
Add Custom Data Fields to Data Sets
How to add Custom Data Fields to allow more custom information to be added to a Data Set. Note: You may need to perform free updates to FieldLab Desktop in order to use this feature. Available for FieldLab Desktop versions 1.10.0 and newer. Update ...Delete Data Sets from FieldLab Pressure Calibrator
You can delete data sets from the FieldLab Pressure, and once they're imported, from the FieldLab Desktop application. 1 Go to the Menu List by pressing the Menu Button 2 Step down to the Data Sets list item with the Down Button and select Data Sets. ...Import Data Sets from a FieldLab Digital Pressure Calibrator
Pull recorded data from any FieldLab device into FieldLab Desktop using a wireless or USB cord connection. Import data with wireless connection 1 Establish a wireless connection Instructions for wireless connections are here: Make a Wireless ...Quick-Start Guide and User Manual for the FieldLab Pressure Calibrator
Download in PDF format below.Run a Pressure Safety Valve/Pressure Relief Valve Test on a FieldLab Pressure Calibrator with auto-crack detection
Use a FieldLab to automatically detect & record the exact pressure at which a valve cracks and reseats, with the additional option of recording Seat Tightness Test results. This features requires FieldLab Desktop version 1.24.0 or later. Download the ...
Recent Articles
Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30
This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...Operation Instructions 10,000 psi Hand Pump (Model XTHP)
Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...Operation Instructions 5000 psi Hand Pump (Model QTHP)
Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth
What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...A Gauge is Overpressurized
Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...