View Data Sets

View Data Sets

1. Select the Data Sets button

Selecting the Data Sets button will display a list of every Data Set that has been imported to your phone.


2. Select the Data Set name to view more detail





    • Related Articles

    • Share Data Sets

      1. Select the Data Sets button Selecting the Data Sets button will display a list of every Data Set that has been imported to your phone. 2. Select the Data Set name to view more detail 3. Select the Share button From here your mobile operating ...

    • Delete a Data Set

      1. Select the Data Sets tab 2. In the Data Sets list view, select the Data Set you want to delete 3. Scroll to the bottom and select the Delete Data Set button

    • Export Data Sets from FieldLab Mobile App

      This article is for FieldLab Mobile App versions 1.5.1 and later Review test data 1. Select the Data Sets tab. 2. Select the Data Set you wish to view from the list. View list of saved data sets The Data Set Overview screen will display key ...

    • Getting Started with FieldLab Mobile App

      This article is for FieldLab Mobile versions 1.5.1 and later. Establish a Bluetooth connection between FieldLab Mobile App and your Ralston gauge. Power on your Ralston gauge. Confirm that your gauge is Bluetooth enabled. Confirm that the Bluetooth ...

    • Get started with FieldLab Mobile

      Check compatibility of your mobile device FieldLab Mobile runs on: iOS versions 11.0 and newer. Android versions 9 and newer. Power on your Field Gauge FieldLab Mobile works with any Bluetooth enabled Ralston Field Gauge. Download FieldLab Mobile ...

    • Recent Articles

    • Set the logging interval for a test

      Applies to FieldLab Mobile versions 2.0 and later 1. Add the pressure and/or temperature readings you need to your test. Learn how to Add Readings to a Test. 2. Tap Test 3. Tap Interval 4. Select your desired interval 5. Select Back The interval you ...

    • Max logging durations based on interval: Quick reference table

      Applies to: All Bluetooth-enabled models of Field Gauge LC20, Process Meter LC30 Ralston Field Gauge and Process Meter gauges log data to on-board memory when you start logging from the Fieldlab Mobile app. The logging interval you select determines ...

    • Add Readings to a Test

      Applies to FieldLab Mobile versions 2.0 and later. This walkthrough demonstrates how to add one pressure reading. You can add as many readings to a test as needed by repeating the steps below. 1. Connect the included Bluetooth antenna(s) to the ...

    • Delete a Reading from the Test screen

      Applies to FieldLab Mobile versions 2.0 and later 1. Tap the Reading Card 2. Tap Reading 3. Tap Delete Reading 3a. Confirm that you wish to delete.

    • Getting Started: Run Your First Test with FieldLab Mobile

      This guide walks you through connecting a gauge, logging data, and retrieving a completed test run. This walkthrough uses a single gauge, but FieldLab Mobile supports multiple gauges and readings in a single test. The following guide applies to ...